Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
Use planning, prioritising, organising, and time management techniques to plan tasks.
Identify and organise resources to complete tasks. For example, consumables.
Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
Identify equipment to work on. Check plant configuration is as defined.
Prepare the work area for maintenance tasks.
Identify environmental and health and safety hazards and risks and apply control measures.
Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
Follow security procedures. For example, site access, document classification, and securing assets.
Follow emergency incident and response procedures.
Apply sustainability principles. For example, minimising waste.
Segregate items for reuse, recycling, and waste.
Use mathematical principles and formulae to support engineering maintenance.
Apply engineering maintenance standards and procedures.
Apply foreign material exclusion procedures.
Follow maintenance tools and equipment control procedures. For example, handling and storage.
Reinstate the work area.
Apply team working principles.
Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
Escalate issues outside limits of responsibility.
Record information.
Produce or amend documents. For example, handover notes and reports.
Identify and highlight issues (red pen), with technical drawings.
Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
Apply continuous improvement techniques to identify improvement suggestions.
Carry out and record planned and unplanned learning and development activities.
Electrical and control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
Electrical and control and instrumentation. Select, check, and use electrical maintenance tools, measurement, and test equipment. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
Electrical and control and instrumentation. Use electrical diagnostic equipment and apply fault finding and rectification techniques. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
Electrical and control and instrumentation. Apply problem solving and critical reasoning techniques.
Electrical and control and instrumentation. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
Electrical and control and instrumentation. Remove and replace electrical parts.
Electrical and control and instrumentation. Prepare and terminate electrical cables.
Electrical and control and instrumentation. Set up and adjust electrical aspects of plant.
Electrical and control and instrumentation. Clean parts. For example, removal of dust and debris.
Electrical and control and instrumentation. Conduct and confirm electrical and connected services isolation and deisolation.
Electrical and control and instrumentation. Conduct functional testing.
Electrical and control and instrumentation. Inspect and test control and instrumentation systems.
Electrical and control and instrumentation. Check calibration and make adjustments.
Electrical and control and instrumentation. Check loop function.
Electrical and control and instrumentation. Set up and adjust control and instrumentation systems.
Electrical and control and instrumentation. Remove and replace instruments and sensors.
Electrical and control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
Electrical and mechanical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
Electrical and mechanical. Conduct and confirm electrical and connected services isolation and deisolation.
Electrical and mechanical. Select, check, and use electrical and mechanical maintenance tools, measurement, and test equipment.
Electrical and mechanical. Use electrical and mechanical diagnostic equipment and apply fault finding and rectification techniques.
Electrical and mechanical. Apply problem solving and critical reasoning techniques.
Electrical and mechanical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
Electrical and mechanical. Remove and replace electrical parts.
Electrical and mechanical. Prepare and terminate electrical cables.
Electrical and mechanical. Set up, align, and adjust electrical aspects of plant.
Electrical and mechanical. Clean parts. For example, removal of dust and debris.
Electrical and mechanical. Conduct functional testing.
Electrical and mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
Electrical and mechanical. Remove and replace mechanical parts.
Electrical and mechanical. Examine mechanical parts for defects. For example, pump seals.
Electrical and mechanical. Set up, align, and adjust mechanical aspects of plant.
Electrical and mechanical. Lubricate mechanical assemblies.
Electrical and mechanical. Apply bench fitting techniques.
Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
Use planning, prioritising, organising, and time management techniques to plan tasks.
Identify and organise resources to complete tasks. For example, consumables.
Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
Identify equipment to work on. Check plant configuration is as defined.
Prepare the work area for maintenance tasks.
Identify environmental and health and safety hazards and risks and apply control measures.
Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
Follow security procedures. For example, site access, document classification, and securing assets.
Follow emergency incident and response procedures.
Apply sustainability principles. For example, minimising waste.
Segregate items for reuse, recycling, and waste.
Use mathematical principles and formulae to support engineering maintenance.
Apply engineering maintenance standards and procedures.
Apply foreign material exclusion procedures.
Follow maintenance tools and equipment control procedures. For example, handling and storage.
Reinstate the work area.
Apply team working principles.
Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
Escalate issues outside limits of responsibility.
Record information.
Produce or amend documents. For example, handover notes and reports.
Identify and highlight issues (red pen), with technical drawings.
Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
Apply continuous improvement techniques to identify improvement suggestions.
Carry out and record planned and unplanned learning and development activities.
Training schedule
This training schedule has not been finalised. Check with this employer if you’ll need to travel to a college or training location for this apprenticeship.
Requirements
Essential qualifications
GCSE in:
English (grade 4 or C)
Maths (grade 4 or C)
Share if you have other relevant qualifications and industry experience. The apprenticeship can be adjusted to reflect what you already know.
... Mechatronics Maintenance Technician apprenticeship, followed by a Level 4 HNC top-up during Years 3 and 4. Your first year will be spent studying at Appris engineering training centre, building solid mechanical, electrical and engineering foundations before moving into site-based learning. From Year 2 onwards, you will combine ...
... fabricated. - check and calibrate control and test equipment used in an engineering and/or manufacturing environment Training schedule - This is a Level 3 Engineering Technician Apprenticeship, Toolmaker pathway, delivered over a period of 3-4 years - The apprentice will attend the training centre, In-Comm Training Services ...
... Mechatronics Maintenance Technician (Level 3) Are you passionate about engineering and eager to learn hands-on mechanical skills? We’re looking for a motivated Engineering Apprentice to join our team and begin an exciting journey toward becoming a skilled Maintenance Engineer. About the Role As an Engineering Apprentice, you’ll ...
... developing the next generation of engineers. As an award-winning Civil Engineering & Transport Planning consultancy, we're offering an exciting opportunity for Apprentice Civil Engineers to join our team and gain hands-on experience while completing a Level 6 Civil Engineering Apprenticeship. Wage Competitive Competitive wage ...
... Ground Engineering Apprentice, you will work alongside experienced geotechnical engineers and engineering geologists whilst studying towards a Level 6 Degree Apprenticeship in either Civil Engineering or Geoscience. You will gain practical experience across a variety of ground engineering projects, developing the technical ...
... reliability, safety, and operational efficiency. Wage £16,640 for your first year, then could increase depending on your age National Minimum Wage rate for apprentices Training course Engineering maintenance technician - dual discipline (level 3) Hours Monday to Friday, 8.30am - 4.30pm. 40 hours a week Start date Sunday ...
... completing apprenticeship training The role provides hands-on experience across a broad range of property maintenance disciplines, including preventative maintenance, fault finding, repairs, painting and decorating, basic plumbing, carpentry, plastering, tiling and general building fabric maintenance. The apprentice will ...
All JOBS October 7, 2026 Civil Engineering Graduate Apprentice Westhill, Aberdeenshire Full Time, Fixed-Term Nicol of Skene, a leading Civil Engineering, Horizontal Directional Drilling & Multi-Utility Contractor, is seeking a Civil Engineering Graduate Apprentice to join our growing team. This is an opportunity to begin ...
... environment - Receive job-specific training and development - Achieve a recognised engineering qualification - Secure a permanent role from the start of your apprenticeship - Have your university tuition fees fully paid About The Role As a Software Engineering Apprentice , you will develop the technical knowledge, practical ...
Summary As an Engineering Apprentice, you’ll begin an exciting journey to develop the technical skills, problem-solving mindset, and hands-on experience needed for a successful career in engineering. In your first year, you’ll train with a specialist provider to gain essential manufacturing skills before joining our Burton ...