To work alongside experienced engineers to develop the skills, knowledge, and experience required to maintain, repair, and improve manufacturing and production equipment. The role combines practical, hands-on training with formal academic study, supporting equipment reliability, safety, and operational efficiency.
Wage
£16,640 for your first year, then could increase depending on your age
Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
Use planning, prioritising, organising, and time management techniques to plan tasks.
Identify and organise resources to complete tasks. For example, consumables.
Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
Identify equipment to work on. Check plant configuration is as defined.
Prepare the work area for maintenance tasks.
Identify environmental and health and safety hazards and risks and apply control measures.
Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
Follow security procedures. For example, site access, document classification, and securing assets.
Follow emergency incident and response procedures.
Apply sustainability principles. For example, minimising waste.
Segregate items for reuse, recycling, and waste.
Use mathematical principles and formulae to support engineering maintenance.
Apply engineering maintenance standards and procedures.
Apply foreign material exclusion procedures.
Follow maintenance tools and equipment control procedures. For example, handling and storage.
Reinstate the work area.
Apply team working principles.
Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
Escalate issues outside limits of responsibility.
Record information.
Produce or amend documents. For example, handover notes and reports.
Identify and highlight issues (red pen), with technical drawings.
Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
Apply continuous improvement techniques to identify improvement suggestions.
Carry out and record planned and unplanned learning and development activities.
Electrical and control and instrumentation. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
Electrical and control and instrumentation. Select, check, and use electrical maintenance tools, measurement, and test equipment. Select, check, and use control and instrumentation maintenance tools, measurement, and test equipment.
Electrical and control and instrumentation. Use electrical diagnostic equipment and apply fault finding and rectification techniques. Use control and instrumentation diagnostic equipment and apply fault finding and rectification techniques.
Electrical and control and instrumentation. Apply problem solving and critical reasoning techniques.
Electrical and control and instrumentation. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
Electrical and control and instrumentation. Remove and replace electrical parts.
Electrical and control and instrumentation. Prepare and terminate electrical cables.
Electrical and control and instrumentation. Set up and adjust electrical aspects of plant.
Electrical and control and instrumentation. Clean parts. For example, removal of dust and debris.
Electrical and control and instrumentation. Conduct and confirm electrical and connected services isolation and deisolation.
Electrical and control and instrumentation. Conduct functional testing.
Electrical and control and instrumentation. Inspect and test control and instrumentation systems.
Electrical and control and instrumentation. Check calibration and make adjustments.
Electrical and control and instrumentation. Check loop function.
Electrical and control and instrumentation. Set up and adjust control and instrumentation systems.
Electrical and control and instrumentation. Remove and replace instruments and sensors.
Electrical and control and instrumentation. Re-connect instrumentation power supply, cables, pipework, and services.
Electrical and mechanical. Confirm safe electrical isolation lockout tagout method has been applied and test for dead.
Electrical and mechanical. Conduct and confirm electrical and connected services isolation and deisolation.
Electrical and mechanical. Select, check, and use electrical and mechanical maintenance tools, measurement, and test equipment.
Electrical and mechanical. Use electrical and mechanical diagnostic equipment and apply fault finding and rectification techniques.
Electrical and mechanical. Apply problem solving and critical reasoning techniques.
Electrical and mechanical. Inspect and test electrical aspects of plant. For example, visual checks, insulation and continuity checks, thermographic surveys, and voltage levels.
Electrical and mechanical. Remove and replace electrical parts.
Electrical and mechanical. Prepare and terminate electrical cables.
Electrical and mechanical. Set up, align, and adjust electrical aspects of plant.
Electrical and mechanical. Clean parts. For example, removal of dust and debris.
Electrical and mechanical. Conduct functional testing.
Electrical and mechanical. Check condition and operation of mechanical aspects of plant and equipment. For example, pumps.
Electrical and mechanical. Remove and replace mechanical parts.
Electrical and mechanical. Examine mechanical parts for defects. For example, pump seals.
Electrical and mechanical. Set up, align, and adjust mechanical aspects of plant.
Electrical and mechanical. Lubricate mechanical assemblies.
Electrical and mechanical. Apply bench fitting techniques.
Review and use information. For example, work instructions, drawings, design specifications, and plant configurations.
Use planning, prioritising, organising, and time management techniques to plan tasks.
Identify and organise resources to complete tasks. For example, consumables.
Respond and adapt to work demands. For example, adapt working methods to reflect changes in working environment, re-prioritise workloads to react to breakdowns and fault scenarios.
Identify equipment to work on. Check plant configuration is as defined.
Prepare the work area for maintenance tasks.
Identify environmental and health and safety hazards and risks and apply control measures.
Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance. For example, signage and barriers, working at height, confined spaces, and COSHH.
Follow security procedures. For example, site access, document classification, and securing assets.
Follow emergency incident and response procedures.
Apply sustainability principles. For example, minimising waste.
Segregate items for reuse, recycling, and waste.
Use mathematical principles and formulae to support engineering maintenance.
Apply engineering maintenance standards and procedures.
Apply foreign material exclusion procedures.
Follow maintenance tools and equipment control procedures. For example, handling and storage.
Reinstate the work area.
Apply team working principles.
Communicate with others to give and receive information. For example, colleagues, customers, and stakeholders.
Escalate issues outside limits of responsibility.
Record information.
Produce or amend documents. For example, handover notes and reports.
Identify and highlight issues (red pen), with technical drawings.
Use digital and information technology. For example, databases, data sharing platforms, email, management information systems, and word processing. Follow cyber security and GDPR requirements.
Apply continuous improvement techniques to identify improvement suggestions.
Carry out and record planned and unplanned learning and development activities.
Summary As an Engineering Apprentice, you will support the maintenance of production machinery, automated systems, and site facilities while developing practical engineering skills in a manufacturing environment. Wage £20,333 a year Training course Engineering maintenance technician - single discipline (level 3) Hours Monday ...
... Instagram and LinkedIn. OUR VISION To Be the Advantage That Helps Our Customers Win. OUR PURPOSE Creating packaging solutions for life’s essentials. 035049 Apprentice Engineer (Open) Key Responsibilities - Gathers and analyzes data pertaining to machine performance and identified problems. Uses data to track and identify ...
Summary Shropshire Electrical Solutions (SES) is seeking a motivated and enthusiastic Apprentice Fire & Security Engineer to join our Engineering team. This is an exciting opportunity for someone looking to build a long-term career within the Fire & Security industry. Wage £16,640 for your first year, then could increase ...
... Engineering Apprenticeship program will give you the technical knowledge, practical skills and workplace experience needed to build a career as a multi-skilled engineer in a busy manufacturing environment. You will work towards a Level 3 Mechatronics Maintenance Technician apprenticeship, followed by a Level 4 HNC top-up during ...
Summary As an Apprentice ICTS Support Engineer, you will provide 1st Line IT Support, answer calls, diagnose hardware and software faults, log customer queries, escalate complex issues to Engineers, assist with hardware builds, install and deploy hardware and software, and support unified communications deployment. Wage ...
Summary Do you enjoy building PCs, experimenting with software, learning about networking, cloud technologies, or cyber security? We’re looking for an ambitious apprentice to join our growing team, gain hands-on experience working alongside our experienced engineers and build the foundations for a successful career in IT. Wage ...
... such as Git, Terraform and Kubernetes - Assist with maintenance, updates and cloud-based projects under supervision - Work closely with your mentor and wider engineering team - Communicate progress, ask questions and seek support when needed - Build relationships across engineering, security, data and product teams Technologies ...
... trainee, apprentice, labouring, maintenance, mechanical, or electrical role. - A relevant college qualification or training in refrigeration, air conditioning, engineering, or building services. - Basic knowledge of hand tools, maintenance tasks, or site-based working environments. - F-Gas certification, or a willingness to ...
Summary Join Babcock as a Nuclear Scientist and Engineer Degree Apprentice and, over the course of our 4-year programme, you’ll work towards a BH degree while contributing to projects that support national security. You'll learn from experienced professionals, gain valuable practical experience and help deliver work that ...